

SKU: | 777651 |
De Aten 19 inch managed power distribution unit beschikt over 7 x IEC320 C13, 1 x IEC320 C19 uitgangen en een C20 aansluiting. De PDU biedt veilig, gecentraliseerd, intelligent, energiebeheer (aan, uit, cyclus) van datacenter IT-apparatuur (servers, opslagsystemen, KVM-switches, netwerkapparaten, seriële datatoestellen, enz.), Deze PDU is eenvoudig uit te breiden of uit te rusten met sensoren in de Energy Management-software voor real-time monitoring, metingen en analyse van energieverbruik en environmental system health
Deze PDU is eenvoudig uit te breiden of uit te rusten met sensoren in de Energy Management-software voor real-time monitoring, metingen en
analyse van energieverbruik en environmental system health - met rapporten van energieverbruik. Vanuit vrijwel elke locatie is via een TCP / IP-verbinding de voedingsstatus van apparaten op de PDU's op PDU niveau te regelen en controleren. De PDU ondersteunt alle v3 SNMP Manager-software van derden en de eco-sensoren (Energy Management Software). Met de optionele sensoren zijn eenvoudige meerdere apparaten te beheren. Ze bieden een intuïtieve en gebruiksvriendelijke grafische gebruikersinterface waarmee de PDU-apparaat is te configureren en de verbruikstatus van de aangesloten apparatuur is te controleren. Naast de het verbruiksvermogen en wattuur is met de sensoren tevens mogelijk om nauwkeurig de omgeving te monitoren (luchtvochtigheid, druk) in een real-time.
Features:
- Power Distribution
- Space saving 1U rack mount design with rear mounting
- IEC or NEMA outlet models
- 3 digit 7-segment front panel LED shows Current / IP Address
- Remote users can monitor outlet status via web pages on their browsers
- Safe shutdown support
- Separate power for the unit's own power and its power outlets. The user interface is still accessible even when an overload condition trips the devices' circuit breaker
Remote Access - Remote power control via TCP/IP and a built in 10/100 Ethernet port
- Network Interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS, 10Base-T/100Base-TX, auto sense, Ping, Telnet
- eco PDU Power Management software – eco Sensors
- Supports SNMP Manager V3
Operation - Remote power outlet control (On, Off, Power Cycle) by individual outlets
- Power-on sequencing – users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
- Easy setup and operation via a browser-based user interface
- Multibrowser support (IE, Firefox, Chrome, Safari)
- RTC support to keep the timer running during times of no power.
- Supports up to 8 user and 1 administrator accounts
- Proactive Overload Protection (POP) – automatically powers off outlets when current overloads to protect operating devices
Management - Power status measurement at the PDU or Outlet level
- LED indicators for current and IP address at the PDU device level
- Real-time current, voltage, and kWH displayed in a browsed-based UI for monitoring at the PDU level
- Current and voltage threshold setting
- Naming support for outlets
- User outlet access assignment on an outlet-by-outlet basis.
- Event logging and syslog support
- Upgradeable firmware
- Multilanguage support: English, German, Traditional Chinese, Simplified Chinese, Japanese, French, Spanish, Italian
Security - Power status measurement at the PDU or
- Two-level password security
- Strong security features include password protection and advanced encryption technologies – 128 bit SSL
- Remote authentication support: RADIUS
eco Sensors Energy Management Software - Automatic discovery of all PE devices within the same intranet
- Remote real-time power measurement and monitoring
- Remote real-time power outlet management*
- Remote real-time environment sensor monitoring
- Plotting/Monitoring of all PE devices
- Exceed threshold alert through SMTP and Syslog
- Power Analysis Report
SPECIFICATIES:
Electrical | |
Nominal Input Voltage | 100 – 240 VAC |
Maximum Input Current | 16A Max |
Input Frequency | 50-60 Hz |
Input Connection | IEC 60320 C20 |
Input Power | 3680 VA(Max) |
Outlet Type | Total : 7 x IEC320 C13 + 1 x IEC320 C19 |
Nominal Output Voltage | 100 – 240 VAC |
Maximum Output Current (Outlet) | C13: 10A(Max) |
C19: 16A(Max) | |
Maximum Output Current (Bank) | 16A(Max) |
Maximum Output Current (Total) | 16A(Max) |
Breakers | 1 x 16A Non-Fuse Breaker |
Metering | Bank level Current, Voltage, VA , PF and KWh Monitoring |
Outlet Switching | Yes |
Environment Sensor Ports | 2 |
Metering Accuracy | Voltage Range: 100VAC ~ 250VAC +/-1% |
Power Range: 100W ~ Maximum Capacity +/- 2% | |
Current Range: 0.1A~1A +/- 0.1A, 1A~20A +/-1% | |
Physical Properties | |
Dimensions (L x W x H) | 43.24 x 22.04 x 4.40 cm |
(17.02 x 8.68 x 1.73 in.) | |
Weight | 2.79 kg ( 6.15 lb ) |
Power Cord Length | 3 m |
Environmental | |
Temperature (Operating / Storage) | 0 – 50°C / -20 – 60°C |
Humidity (Operating & Storage) | 0 – 80% RH, Non-Condensing |
Compliance | |
EMC Verification | CE, Others by Request |
Safety Verification | TUV-CB, CE-LVD, Others by Request |
Help ons en andere klanten door het schrijven van een review